Lucent Technologies Release 7 Removing ATM PNC connections, Changing circuit pack location or ATM address

DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4 June 1999
Maintenance Object Repair Procedures
9-169ATM-EI (Expansion Interface Circuit Pack)
9
2. If the ATM PNC EI circuit pack is not present or is present b ut it is in an
EPN that does not yet have PNC connectivity to it, use the change
circuit-pack command to add circuit pac k translation for the missing
circuit pack.
3. Enter add atm pnc
n (connection number), and administer the circ uit
pack location and ATM address.
4. Enter change system-parameters duplication and change the Enable
Operation of PNC Duplication field to y.
Removing ATM PNC connections
Standard Reliability
NOTE:
Standard Reliability systems are not equipped with PNC duplication.
1. Enter busyout atm-pnc
n (connection number)
2. Enter remove atm-pnc
n (connection number)
Critical Reliability
1. Enter status pnc and ensure that the A-PNC is active. If it is not active,
request a PNC interchange using the reset pnc interchange c ommand.
2. Enter busyout pnc-standby.
3. Enter change system-parameters duplication and change the Enable
Operation of PNC Duplication field to n.
4. Enter busyout atm-pnc
n (port network number).
5. Enter remove atm pnc
n (port network number) to remove both ATM PNC
EI boards, or enter change atm pnc to remove the B-side ATM PNC EI
board.
6. Enter change system-parameters duplication and change the Enable
Operation of PNC Duplication field to y.
Changing circuit pack location or ATM address
Standard Reliability
NOTE:
Standard Reliability systems are not equipped with PNC duplication.
1. Remove the ATM PNC connection (see ‘‘Removing ATM PNC
connections’’ above).
2. Add an ATM PNC connection (see ‘‘Adding ATM PNC connections’’
above).