DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Object Repair Procedures
9-99ANN-BD (Announcement Circuit Pack)
9
5. To delete an announcement, press 3, and confi rmation tone will be given if
the delete was success ful.
Saving and Restoring Announcements
Integrated announcements on the announcement circuit p ack can be up loaded
to the system tape or disk with the save announcements c ommand. Likewise,
integrated announcements c an be download ed to the announcement c ircuit
pack with the restore announcements command . Both commands require a
free system port, an announcement d ata module administered on t he
announcement circuit p ack and, if saving to tap e, a non-write protected tape
cartridge in the tap e drive. Typical announcement up loads or download s take 30
to 45 minutes, depending on system traffic.
The system automatically attempts to do wnload to the announcement circ uit
pack 5 minutes after it is inserted . This automatic download p rocedure may be
aborted or preemp ted by any of the following :
■An announcement is recorded within 10 minutes of circuit p ack insertion.
■An announcement download i s invoked sooner with the restore
announcements command.
■An announcement data modul e is not administered or is busy.
■A system access por t is not available.
■There is no tape is in the system when saving to tap e.
■The tape or disk does not have a valid announcement file.
NOTE:
If the announcement file bec omes corrupted, the only s olution is to
re-record all announcements.
!WARNING:

All alarms are upgraded to MAJOR when the BASE Tone Generator is set to

12. (France).