DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Object Repair Procedures
9-104ANN-BD (Announcement Circuit Pack)
9
Angel-Speech Processor Handshake Test (#208)

This test checks the integrity of the c ommunication link between the two

processors on the Announcement circuit pack.

!CAUTION:

Failure of this test indicates that the Speech Processor is i nsane and results

in the loss of all integrated announc ements on the circuit pac k.

Order of Investigation Short Test
Sequence Long Test
Sequence D/ND1
1. D = Destructive; ND = Nondestruc tive
Control Channel Looparound Test (#52)2
2. For results of these tests, see the “XXX-BD (Common Port Circuit Pack)” section.
X ND
Angel -Speec h Proc essor ( SP) Hand shake X ND
Test (#208)
Clock Match Inquiry (#212) X X ND
Super Frame Match Inquiry (#211) X X ND
140AY Looparound Test (#210) X X ND
Announcement Checksum Test (#209) X X ND
Network Processor Element (NPE) Audit
Test (#50)2XND
SAKI Test (#53)2XD
Table 9-39. TEST #208 Angel-Speech Processor (SP) Handshake Test
Error
Code Test
Result Description/ Recommendation
2000 ABORT Response to the test request was not received within the allowable time
period. If Error Type 1538 is present in the Error Log, follow the
maintenance strategy recommended for this Error Type.
2100 ABORT Could not allocate the necessary system resources to run this test.
ABORT Internal system error.
1. Retry the command at 1-minute intervals for a maximum of 5 times.
Continued on next page