DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Object Repair Procedures

9-110ANN-BD (Announcement Circuit Pack)

9
Super Frame Match Inquiry Test (#211)

The super frame is a means by which th e Speech Processor (SP) synchronizes

with the 140AY device on the announcement circ uit pack. If the super frame is

not synchronized, the SP will not be able to p roperly process rec ord/playbac k

requests. Both the SP and the hardware generate a sup er frame pulse. When

these two pulses are out of synch, the SP sets a flag to ind icate the mismatch.

When this test is run, the state of this flag is returned.

2000 ABORT Response to the test request was not received within the allowable time
period. If Error Type 1538 is present in the Error Log, follow the maintenance
strategy recommended for this error type.
2007 ABORT The Announcement c ircuit pack thin ks that Port 1 or Port 9 is busy.
1. Retry the command at 1-minute intervals for a maximum of 5 times.
2. If the test continues to abort, follow the Announcement Port
maintenance procedures for Ports 1 and 9.
2100 ABORT Could not allocate the necessary system resources to run this test.
ABORT Internal system error. Retry the command at 1-minute intervals for a
maximum of 5 times.
1-3 FAIL Test failed. The error code indicates at which speech c ompression rate the
test actually failed (1 being the first rate tested, 3 being the last).
1. Reset the circuit pack usingthe reset board UUCSS command and
then run this test again. If the test continues to fail, replace the circuit
pack.
2. If there are recurring alarms on this circuit pack caused by this test
failing, replace t he circuit pac k even if step 1 works.

!CAUTION:

Replacing the circuit pack will result in loss of integrated

announcements. See ‘‘Essential Service Information’’ above.

PASS The record channel on the announcement circuit pack is functioning
properly. User-reported troubles on this circuit p ack should be investigated
using other circuit pack and p ort tests. Refer to “ANN-PT” for a description
of the port tests.
Table 9-41. TEST #210 140AY Looparound Te st — Continued
Error
Code Test
Result Description/Recommendation
Continued on next page