DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Object Repair Procedures
9-975ISDN-TRK (DS1 ISDN Trunk)
9
1120 ABORT The DS1 ISDN Trunk is in the ISDN out-of-service/far-end state.
1. Try to change the service state via Tes t #256 (Service State Audit Test) and
then try this test again. Keep in mind that the trunk may be in the
out-of-service/far-end state due to problems at the far-end switch. If that is
the case, no remedial action can be taken at this end.
1122 ABORT There is no test line number for the far-end switch.
1. Check the Trunk Group Administration for m.
1123 ABORT There is no Feature Access Code administration for this Facility Test.
1. Check the Dial Plan and Feature Administration forms.
2000
2012
None
ABORT Internal system error.
1. Retry the command at 1-minute intervals a maximum of 5 times.
2035 ABORT The call has timed out, perhaps because of a lack of system resources.
1. Wait 1 minute and try again.
2036
2037 ABORT Internal system error.
1. Follow recommendation for ABORT code 2012.
2038
2039 ABORT A problem occurred while trying to read the test data.
1. Wait 1 minute and then try again. If the test aborts again in the same
manner, there is a serious internal p roblem.
2040 ABORT Internal system error. Follow recommendations for ABORT code 2012.
2041 ABORT The call has timed out, perhaps because of a lack of system resources. Follow
recommendations for ABORT code 2035.
2066 ABORT Could not establish test c all.
1. Retry the command at 1-minute intervals a maximum of 5 times.
2067 ABORT The call has timed out, perhaps because of a lack of system resources. Follow
recommendations for ABORT code 2035.
2074 ABORT Bit and Block Error query failed.
1. Retry the command at 1-minute intervals a maximum of 5 times.
2. If the test continues to abort, there may be a serious internal problem with
M/T-DIG (Maintenance/Test Digital Port). If this is the case, refer to the
M/T-DIG (Maintenance/Test Digital Port).
2075 ABORT Internal system error. Follow recommendations for ABORT code 2012.
2100 ABORT Could not allocate the nec essary system resources to run this test.
1. Retry the command at 1-minute intervals a maximum of 5 times.
Table 9-375. TEST #258 ISDN Test Call — Continued
Error
Code Test
Result Description/ Recommendation
Continued on next page