DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Object Repair Procedures

9-1189PE-BCHL (PRI Endpoint Port)

9
Audit and Update Test (#36)
This test sends port level translation d ata from switch processor to the UDS1 interface circuit p ack to assure that the port’s tran slation is correct. The port aud it operation verifies the consistenc y of the current state of port kep t in the UDS1 interface circuit p ack and in the switc h software.
Table 9-471. TEST #7 Conference Circuit Test
Error
Code Test
Result Description/ Recommendation
ABORT Could not allocate the necessary system resources to run this test.
1. Retry the command at 1-minute intervals for a maximum of 5 times.
1000 ABORT System resources required to run this test are not available. The port may be in
use on a valid call. U se status pri-endpoint extension commands to determ ine
when the port is available for testing.
1004 ABORT The port has been seized b y a user for a valid call. Use status pri-endpoint
extension to determine when the port is available for testing.
1. Retry the command at 1-minute intervals for a maximum of 5 times.
1020 ABORT The test did not run due to an already existing error on the specific port or a
more general circuit pack error.
1. Examine Error Log for existing errors against this p ort or the circuit p ack
and attempt to diagnose the already existing error.
2000 ABORT Response to the test request was not received within the allowable time period .
2100 ABORT Could not allocate the nec essary system resources to run this test.
1. Retry the command at 1-minute intervals for a maximum of 5 times.
Any FAIL The NPE of the tested port did not conference the tones correctly. This will
cause noisy and unrelia ble connections.
1. Replace the circuit pack . Even though wideband calls do not use the
conferencing feature on the NPE, this failure indicates problems with the
circuit pac k hardware.
PASS The port can correctly conference multip le connections. User-reported troubles
on this port should be investigated using other port tests and examining
terminal adapter or external wiring.
Continued on next page