DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Object Repair Procedures
9-357BRI-SET, ASAI-ADJ, BRI-DAT
9
Table 9-155. TEST #630 BRI Set Audits
Error
Code Test
Result Description/ Recommendation
1113 ABORT The signaling link between the switch and the endpoint is down.
1. Use the test port PCSSpp long command to c lear any errors which
prevent establishment of t he signaling link.
2. Examine the results of the Signaling Link Status Test (#626) which is run
as part of this command. If this test aborts or fails, follow the repair
procedure for Test #626.
3. If the BRI Set Audits test continues to abort, escalate the problem.
1139 ABORT The Packet Bus in the port network is out-of-service.
1. Follow the repair procedures for the Packet Bus.
2. After completing Step 1, execute the test port long PCSSpp command,
and review the results of the BRI Port Local LAN Loop Around Test to
verify the repair.
1141 AB ORT The PKT-CTRL is out-of-service.
1. Refer to PKT-CTRL (Packet Control Circuit Pack) Maintenance
documentation.
2. If Step 1 does not resolve the problem, escalate to the next tier.
1144 ABORT The PPN Packet Bus is out-of-service.
1. Follow the repair procedures for the Packet Bus in the PPN.
2. After completing Step 1, execute the test port long PCSSpp command,
and review the results of the BRI Port Local LAN Loop Around Test to
verify the repair.
Continued on next page