Lucent Technologies Release 7 9-1124M/T-PKT (Maintenance/Test Packet Bus Port)

DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4 June 1999
Maintenance Object Repair Procedures
9-1124M/T-PKT (Maintenance/Test Packet Bus Port)
9
Table 9-447. TEST #567 Consistency Test
Error
Code Test Result Description/ Recommendation
2000 ABORT Response to the test request was not received within the allowable time
period.
2100 ABORT System resources necessary to run this test are not available.
2500 ABORT An internal operation failed, and the test could not be completed.
1. Retry the command at 1-minute intervals a maximum of 5 times.
2. If the test continues to abort, escalate the problem.
2059 FAIL The M/T-PKT has reported a failure of the on-board self-test.
2060 FAIL The M/T-PKT has reported an invalid state for the Packet Bus.
2061 FAIL The SPE cannot communicate with the M/T-PKT, but is able to communicate
with the Maintenance/Test Circuit Pack.
1. Retry the command.
2. If the test continues to fail, replace the Maintenance/Test circuit pack
and retry the command.
3. If the test continues to fail, refer to PKT-BUS Maintenance
documentation to determine if the M/T-PKT failure is being caused by a
Packet Bus fault.
PASS The M/T-PKT Packet Bus fault detection cap ability is operating c orrectly.
Continued on next page