DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Object Repair Procedures
9-883FIBER-LK (Fiber Link)
9
145 FAIL The SNI circuit pack (endpoint 1 of the fiber-link) has a fiber out of frame
condition and a loss of signal condition. Also, a lightwave transceiver is
connected to the SNI circuit pack.
1. Check that the connected circuit pack is p hysically installed. The
connected circuit pac k is the other endpoint of the fiber-link if no DS1
CONV complex is administered (check via list fiber-link). Otherwise, if a
DS1 CONV complex is administered, the connected circuit pack is the DS1
CONV circuit pack connected to the SNI circuit pac k.
2. Perform the Fiber Fault Isolation Procedure described in Chap ter 5.
3. Replace this SNI circuit pack.
4. Replace the connected circuit pac k.
146 FAIL The SNI circuit pack (endpoint 1 of the fiber-link) has a fiber out of frame
condition, and a loss of signal condition. Also, no lightwave transceiver is
connected to the SNI circuit pack.
1. Check that the connected circuit pack is p hysically installed. The
connected circuit pac k is the other endpoint of the fiber-link if no DS1
CONV complex is administered (check via list fiber-link). Otherwise, if a
DS1 CONV complex is administered, the connected circuit pack is the DS1
CONV circuit pack connected to the SNI circuit pac k.
2. Perform the Fiber Fault Isolation Procedure described in Chap ter 5.
3. Replace this SNI circuit pack.
4. Replace the connected circuit pac k.
241 FAIL The SNI circuit pack (endpoint 2 of the fiber-link) has a fiber out of frame
condition, but no loss of signal condition. Also, a lightwave transceiver is
connected to the SNI circuit pack.
1. Check that the connected circuit pack is p hysically installed. The
connected circuit pac k is the other endpoint of the fiber-link if no DS1
CONV complex is administered (check via list fiber-link). Otherwise, if a
DS1 CONV complex is administered, the connected circuit pack is the DS1
CONV circuit pack connected to the SNI circuit pac k.
2. Perform the Fiber Fault Isolation Procedure described in Chap ter 5.
3. Replace this SNI circuit pack.
4. Replace the connected circuit pac k.
Table 9-336. TEST #989 SNI Fiber Out of Frame Query — Continued
Error
Code Test
Result Description/ Recommendation
Continued on next page