Lucent Technologies Release 7 9-863FIBER-LK (Fiber Link)

DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4 June 1999
Maintenance Object Repair Procedures
9-863FIBER-LK (Fiber Link)
9
105 FAIL The SNI circuit pack (endpoint 1) cannot communicate with the equipp ed SNI
in slot 5 (list fiber-link can be used to display fiber link endpoints).
1. Perform the ‘‘Fiber Fault Isolation Procedure’’. This sh ould resolve multiple
SNI-PEER err ors.
2. If the SNI being tested has SNI-PEER Error Type 769, replace the SNI being
tested. Replacing an SNI may be service interrupting. Refer to the SNI-BD
secti on for t he pr oced ure for repla cing an SNI. To vi ew SNI-PEER e rrors,
use the display errors command with category PNC-PEER. Retry the
command.
3. If the SNI being tested has SNI-PEER Error Type 769, replace the SNI in
slot 5.
106 FAIL The SNI circuit pack (endpoint 1) cannot communicate with the equipp ed SNI
in slot 6 (list fiber-link can be used to display fiber link endpoints).
1. Perform the ‘‘Fiber Fault Isolation Procedure’’. This sh ould resolve multiple
SNI-PEER err ors.
2. If the SNI being tested has SNI-PEER Error Type 1025, replace the SNI
being tested. Replacing an SNI may be service interrupting. Refer to the
SNI-BD section for the procedure for replacing an SNI. To view SNI-PEER
errors, use the display errors command with category PNC-PEER. Retry
the command.
3. If the SNI being tested still has SNI-PEER Error Type 1025, replace the SNI
in slot 6.
107 FAIL The SNI circuit pack (endpoint 1) cannot communicate with the equipp ed SNI
in slot 7 (list fiber-link can be used to display fiber link endpoints).
1. Perform the ‘‘Fiber Fault Isolation Procedure’’. This sh ould resolve multiple
SNI-PEER err ors.
2. If the SNI being tested has SNI-PEER Error Type 1281, replace the SNI
being tested. Replacing an SNI may be service interrupting. Refer to the
SNI-BD section for the procedure for replacing an SNI. To view SNI-PEER
errors, use the display errors command with category PNC-PEER. Retry
the command.
3. If the SNI being tested still has SNI-PEER Error Type 1281, replace the SNI
in slot 7.
Table 9-333. TEST #759 Configuration Audit — Continued
Error
Code Test Result Description/ Recommendation
Continued on next page