DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Object Repair Procedures
9-350BRI-SET, ASAI-ADJ, BRI-DAT
9
1187 ABORT The circuit pack, port or station may have been busied out by a technic ian.
1. Look in the Error Log for Error Type 18 (busied out ) for BRI-BD,
BRI-PORT, or BRI-SET.
a. If this error type is present for BRI-SET only, then release the station
via the release station
b. If this error type is present for BRI-PORT and BRI-SET, then release
the port via release port PCSSpp command and run the test again.
c. If the error is present for BRI-BD, BRI-PORT, and BRI-SET, then
release the circuit pack via the release port PCSSpp command and
run the test again. If the error is present for both BRI-BD and
BRI-PORT, then release the circuit pack via the release board
PPCSS command and run the test again. If the error is present for
BRI-SET only, then release the circuit pack via the release port
PPCSS command and run the test again.
NOTE:
When you release the circuit p ack, you release all ports as sociated
with it. If certain ports still need to be busied out, use the release port
PCSSpp command to busy them out.
2. Make sure the terminal is connected.
3. Retry the command at one-minute intervals a maximum of five times.
2012 ABORT Internal System Error.
1. Retry the command at one-minute intervals a maximum of five times.
2. If the test continues to abort, escalate the problem.
2068 ABORT The endpoint has rejected the switch sent application message. This
indicates that the endpoint does not support the ISDN-BRI Management and
Maintenance Procedure for Loop Back Testing.
1. Use the change station extension command and change the
MIMs Suppo rted
field to n.
2069 ABORT The endpoint has returned an error response to the application message sent
by the switch.
2100 ABORT Could not allocate the necessary system resources to run this test.
1. Retry the command at one-minute intervals a maximum of five times.
2. If the test continues to abort, escalate the problem.
Table 9-152. TEST #627 BRI Remote Loop Back — Continued
Error
Code Test
Result Description/ Recommendation
Continued on next page