DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Object Repair Procedures
9-304BRI-BD/LGATE-BD (ISDN-BRI Line Circuit Pack)
9
Table 9-137. TEST #595 LANBIC Receive Parity Error
Counter Test
Error
Code Test
Result Description/ Recommendation
2000 ABORT Response to the test was not received from the circuit pack within the
allowable time period.
1. If the test aborts repeatedly a maximum of five times, reset the circuit
pack via the busyout board UUCSS and reset board UUCSS
commands.
2. If the test aborts again, replace the circuit pack .
2100 ABORT Could not allocate the necessary system resources to run this test.
2012 ABORT Internal System Error.
1. Retry the command at one-minute intervals a maximum of five times.
2. If the test continues to fail, escalate the problem.
1-10 FAIL The circuit pack is still detecting errors of this typ e. The error code indicates
the value of the on-board error counter.
1. Retry the command at one-minute intervals a maximum of five times.
2. If the test continues to fail, verify the validity of the Packet Bus. Run the
Packet Bus maintenance test with the test pkt P long command. If any
Packet Bus tests fail, refer to the ‘‘PKT-BUS (Packet Bus)’’ Maintenance
documentation for recommended repair proced ures.
3. If the Packet Bus test passes, check the validity of the circuit pack.
Execute a test that involves data transmission onto the Packet Bus. For
example, the BRI may use the connectivity tests of the port-level
maintenance object (BRI-PORT) by executing the test port UUCSSpp
command. Refer to the repair procedures for the executed test if it fails.
Otherwise, proceed to the next step.
4. Other circuit packs on the Packet Bus may be the cause of the parity
error. Use the display errors command to check the Error Log for other
circuit packs that are alarmed. If any alarms are present for the other
circuit packs, retire those alarms also. Then, rerun the LANBIC Receive
Parity Error Counter Test (#595) on this circuit pack.
PASS No errors detected by circ uit pack.
Continued on next page