DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Object Repair Procedures
9-996MAPD-BD (MAPD Interface Circuit Pack TN802)
9
MAPD-BD (MAPD Interface Circuit Pack TN802)
The TN802 Multiple Application Platform for DEFINITY (MAPD) circuit pack
allows sending voice and fax from DEFINITY ECS through the Internet to another
DEFINITY also having this feature or to other PBXs that are equipped with the
Internet Telephony Server (ITS-E).
Throughout this section the term TN802 means the MAPD IP trunk circuit p ack.
Be sure to observe these speci al considerations for the TN802:
■Port alarms on this circuit pac k display as “TIE-DS1” in the Alarm and
Error logs.
■The reset board c ommand reboots the MAPD PC CPU, but busyout
board only busys out all of the emulated p orts on the board.
■Switch resets that take the switch out of service for more than 20 seconds
also cause the MAPD's PC to reboot, which takes several mi nutes to
complete.

Switch-demanded tests

Switch-demanded d iagnostic tests on the TN802 do not run unless the Internet
trunking applic ation is running on Windows NTTM, located on the circuit pac k.

Feature limitations

The Internet trunking applic ation relies on the single call sc enario, or a direct,
point-to-point call that d oes not terminate at multiple DEFINITY nodes through
call processing. Table 9-384 describes the feature limitations for DEFINITY ECS.
MO Name (in
Alarm Log) Alarm
Level Initial Command to Run1
1. UU is the universal cabinet number (1 for PPN, 2 - 44 for EP Ns) . C is t he carrier designation (A,
B, C, D, or E). SS is the number of the slot in which the circuit pack resides (01 to 21).
Full Name of MO
MAPD-BD MAJOR test board UUCSS sh MAPD Interface Circuit Pack
MAPD-BD MINOR test board UUCSS l MAPD Interface Circuit Pack
MAPD-BD WARNING test board UUCSS sh MAPD Interface Circuit Pack