DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Object Repair Procedures
9-13ADM-CONN (Administered Connection)
9
d. The exact failure cause is unknown or has been mapped to one of these
values. If this is not a temporary cond ition, try reversing the direc tion of the
Administered Connection (orig inate the administered c onnection from the
destination switch). This may yield another failure cause.
e. The destination endpoint is not available. Check the status of the
destination endpoint at the far-end switch. The status for the destinat ion
endpoint will not be availab le on the switch where this error is log ged. At
the far end, use status access-endpoint or status data-module to see
whether the endpoint is busy, out-of-servic e or otherwise unavailable.
f. This switch sent an ISDN message to another switch, which either d id not
respond (18) or did not respond within the allotted ti me (102). This could
be due to link failure or cong estion or outage at the other switc h.
g. The address of the destination end point has changed . Change the
administered connec tion according ly. The destination endpoint will not be
administered on the switch where this e rror is logged.
h. These errors i ndicate that a resource (for example, a circuit or bearer
capability) requi red by the administered connection is not presentl y
available.
i. A network failure (38) or temporary failure (41) has occ urred. Error Log
entries for other MOs (for example, DS1-BD) may indic ate a local problem .