DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Commands
8-255status conference
8
Drop Reason
(cont’d)
Endpoint Clearing received from DS1 - the disconnect came from
the endpoint. The endpoint notifi ed the MCU that it intended to
disconnect.
Far-end Clearing received from DS1 - the d isconnect came from
either the network or the endpoint.
Handshake Either framing was never found (the endp oint could not
complete initialization - p roblems finding Frame Alig nment Signal
(FAS), Multi Frame Alignment (MFA) and getting a corrected coded
cap-set) or framing was lost for some time (over 40 seconds) and the
endpoint was disc onnected.
IDtimeout The MCU has not received response to the
UIN/password Query from the H.320 user after three attemp ts. Each
attempt has a system administered timeout period.
Internal MCU has a problem alloc ating trunk resources nec essary
to route the dial-out call for the sp ecified dial-numb ers. This problem
can be associated with routing pattern or trunk assoc iated translation
(for example, TAC specified in the dial-out number or routing pattern
points to a trunk group without mem bers), or it can indic ate a lack of
trunk resources (for example, all trunk memb ers are maintenance
busy or all in-service memb ers are busy on a call).
Network Clearing received from DS1 - the disconnect c ame from the
network. The endpoint that had the d isconnect notific ation capability
disconnected without notifying the MCU.
Not-MCU The dial-out destination number(s) of th e “CAS” extension
has terminated to a number that is not a d ial-in cascad e MCU
extension.
No-ring This dial-out drop reason oc curs when the call has b een up
for 30 seconds and no ring ing is detect ed.
Reorder This dial-out drop reason occ urs when the MCU detects
that there are no available trunks in the network to plac e the call. This
drop reason is detec ted by MCU CPTR resources. See “Dial-out” for
a description of CPTR usage.