DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Commands
8-341test hardware-group
8
test hardware-group
This command runs a series of demand maintenance tests on all hardware in a
specified g roup: a carrier, cabinet, p ort network, PNC (A or B), SPE, circuit pack
or the entire system. The tests executed vary d epending on the op tions chosen
and types of hardware in the g roup. Some tests are run concurrently to spee d
execution, so test results for several maintenanc e objects may be intermixed .
A hardware-group command running in the foreground c an be aborted b y
pressing Cancel or by entering cancel hardware-group at another terminal. The
cancel command must be used for a test running in the background. You can
restart a canceled hard ware-group test at the point it left off b y entering resume
hardware-group. Hardware group tests started with the all-ports or
spe-interchange op tions can be resumed, b ut they will not always test every port
that originally would have bee n tested.
Feature Interactions
test hardware-group [system | carrier UUC | cabinet UU | port-network PN# |
pnc a-pnc | b-pnc | board UUCSS | spe]
[print | schedule]
Test
hardware-group Only one "test hardware-g roup" command can b e active at any given
time.
TTI If the test hardware-group c ommand is issued with the all-ports
option while the TTI background task is active, some unadministered
ports may not be tested . In addition, active alarms on line ports may
be cleared b y this task. The status tti command may be used to
determine the state of the TTI background task.
test fiber-link 1 b-pnc SPE B
TEST RESULTS
Port Maintenance Name Alt. Name Test No. Result Error Code
1 B-PNC FIBER-LK 777 PASS
1 B-PNC FIBER-LK 759 PASS
1 B-PNC FIBER-LK 989 PASS
1 B-PNC FIBER-LK 237 PASS
1 B-PNC FIBER-LK 238 PASS
Command Successfully Completed