DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Commands

8-281status link n

8
Output

The following example shows pag e 1 of the output from the status link

n

command (si w/ TN794 Net Packet/Packet Interface circuit pack).

Link/Port Status form (page 1)

Example below from Berlin (4-15-99):

Field descriptions (page 1)
Action/Object Qualifier Qualifier Description Permissions Defaults Feature
Interactions
status link
n
Number of the administered link.
Example:
status link 1
init
inads
craft
none none
Link Number Administered link number (assigned by add/change
data-module command)
Link Status Displays no, yes, unavail, connected, disconeected, enab led,
out-of-service, or restarting
Link Type The type of interface according to the physical/link protocol(s)
immediately “below” the network layer in the protocol stack
(ethernet, ppp, bx.25)
Link Name Administered link name (assig ned by add/change
data-module command)
Service Port Location Administered port location (assigned by add/change
data-module command)
status link 1 Page 1 of 3
LINK/PORT STATUS
Link Number: 1
Link Status: connected
Link Type: ethernet
Link Name: ethernet on link 1
Service Port Location: 01A0917
Service Port Data Extension: 2991
Service State: in-service/idle
Node Name: ber1
Source IP Address: 192.168.10.11
Subnet Mask: 255.255.255.0
Broadcast Address: 255.255.255.255
Physical Address: 00:00:00:00:00:00
Enabled? yes
Maintenance Busy? no
Active Channels: 0