DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Object Repair Procedures

9-856FIBER-LK (Fiber Link)

9
SNI Off-Board Destructive Facility Test (#756)
This test is destructive.

The SNI runs a destructive looparound of the off-b oard and on-board

looparounds. This test returns the result of the off-board looparound, while test

757 returns the result of the on-board looparound . For SNI-SNI fiber links, this test

is run on both SNI circuit pac k endpoints of the fiber link.

2100 ABORT System resources required to run this test are not available.
1. Run the test board UUCSS test separately for each Expansion Interface
endpoint on this fib er link and follow the proc edures in the EXP-INTF
section.
2500 ABORT Internal system error
1. Run the test board UUCSS test separately for each Expansion Interface
endpoint on this fib er link and follow the proc edures in the EXP-INTF
section.
FAIL Expansion Interface circuit pack could not d etect framing sequence.
1. Run the test board UUCSS test separately for each Expansion Interface
endpoint on this fib er link and follow the proc edures in the EXP-INTF
section.
PASS The Expansion Interface circuit pack(s) have detected the valid framing sig nal
on the fiber.
1. Refer to errors from other EI circuit packs, Switch Node Interface tests, or
DS1 Converter tests (if present) if the link is still not functioning.
Table 9-331. TEST #756 SNI Off-Board Destructive Facility Test
Error
Code Test
Result Description/ Recommendation
1015 ABORT The system will not allow this test to be run because the fiber link has not been
busied out. Busy out the fiber link with busyout fiber-link F P. Repeat the test
fiber-link F P long command.
Continued on next page
Table 9-330. TEST #238 Expansion Interface Fiber Out-of-Frame
Query Test — Continued
Error
Code Test
Result Description/ Recommendation
Continued on next page