Lucent Technologies Release 7 Table 5-6 shows the various LEDs on the A500 ATM switch and the meanings of the different states., Table 5-5. TN230X LED reference Continued LED color Interpretation Red Green Yellow

DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4 June 1999
Alarms, Errors, and Troubleshooting
5-29ATM Tips
5
Table 5-6 shows the various LEDs on the A500 ATM switch and the meanings of
the different states.
- Slow blink - Board insertion has not yet completed.
- Steady on - Running maintenance tests. May appear to be blinking
if several short tests are run one after anothe r.
Steady on - - Hardware alarm. Does not nec essarily take the TN230X
out of service, for example, if one of the 24 DSPs fails
diagnostics.
Table 5-6. A500 LED Quick Reference
Component Label Color State Meaning
Switch
Proces sor
Board
LK Green Intermittent
blink Normal state. T raffic is being sent or received over the Ethernet LAN link.
RX Green Steady on Normal state. Carrier is received over the
Ethernet LAN link.
DIAG Green Off Normal state.
NBOOT Green Off Normal state.
MGT Green Off Normal state.
RUN Green Steady on Normal state. The switch processor is
running.
PWR Green Steady on Normal state. The switch processor board is
powere d up.
VOLT Yellow Off Normal state
TEMP Yellow Off Normal state
FAN Yellow Off Normal state
SYSERR Yellow Off N ormal s tate
FAULT Yellow Off Normal state
Switch Fabri c
Board PWR Green Steady on Normal state. The switch fabric board is powere d up.
Continued on next page
Table 5-5. TN230X LED reference — Continued
LED color Interpretation
Red Green Yellow
Continued on next page