DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Object Repair Procedures

9-1102M/T-ANL (Maintenance/Test Analog Port)

9
Hook State Inquiry (#566)

This test ensures that the Maintenance/Test Analog Port maintenance software

and call proces sing agree on the on-/off-hook status of the Maintenanc e/Test

Analog Port.

Table 9-439. TEST #566 Hook State Inquiry
Error
Code Test Result Description/ Recommendation
1 ABORT Switch hook audit timed out. No response was received from the circuit p ack
for information about the switch hook state.
1. Retry the command at 1-minute intervals a maximum of 3 times.
2. If the test continues to abort, replace the ci rcuit pack and repeat the test.
2100 ABORT System resources required to run this test are not available.
1. Retry the command at 1-minute intervals a maximum of 3 times.
Any FAIL Internal system error
1. Retry the command at 1-minute intervals a maximum of 3 times.
2. If the test continues to fail reset the circuit pack via the busyout board
UUCSS, reset board UUCSS, release board UUCSS command
sequence.
3. Retry the command at 1-minute intervals a maximum of 3 times.
PASS Call processing and Maintenance/Test Analog Port maintenance software
agree on the Maintenance/Test Analog Port hook state.
Continued on next page