DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Object Repair Procedures

9-1946XXX-BD (Common Port Circuit Pack)

9
NPE Audit Test (#50)

The system sends a message to the on-board microprocessor to up date the

network connectivity translation for all the Ne twork Processing Elements (NPEs)

on the circuit pac k.

Table 9-721. TEST #50 NPE Audit Test
Error
Code Test
Result Description/ Recommendation
None
2100 ABORT System resources required for t his test are not available.
1019 ABORT Test already in progress.
FAIL Internal system error
1. Retry the command at 1-minute intervals a maximum of 5 times.
PASS The circuit pac k’s NPEs have been updated with their translation.
EXTRA
BD Certain circuit packs have limitations on how many circuit packs can be in the
system or port network such as the Maintenance/Test circuit pack (TN771B or
TN771C), the Tone Detector circuit pack (TN748B, TN748C or TN748D) and
the Call Classifier (TN744). The Maintenance/Test circuit pack allows only one
circuit pack per port network. The Tone Detector and Call Classifier allow only
10 circuit packs in each system. All additional circuit p acks will return
EXTRA-BD and should be removed.
Any NO
BOARD This is normal if the test is being done when (a) the board is not physically in
the system or (b) the system is booting up. Otherwise, there is some
inconsistency between the physical configuration and the data kep t in the
system.
1. Verify that the board is physically in the system.
2. Verify that the system is not in a stage of booting up.
3. Retry the command at 1-minute intervals for a maximum of 5 times.
Continued on next page