DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Commands
8-289status processor-channel 1
8
The status pgate-port c ommand displays the op erational status of a a specified
Packet Gateway port. Such ports support the connec tion of X.25 adjunct
applications to the system . If the technician knows the X.25 link number
associated with the connec tion, but not the port numb er, then the “status link”
command may be used to access exactly the same information.
Adjunct App lications support ed over X.25 connections inc lude:
■AUDIX
■Calling Party Billing Number (CPN/BN or ISDN Gateway)
■CMS
■DCS
■Gateway Channels for DCS over ISDN-PRI
■Message Server
See

DEFINITY Communications System Generic 3 V2 Implementation,

555-230-653, for details. Status information provid ed by the command is
restricted to the switch hard ware and extends no further than the Packet
Gateway circuit pac k port.
The screen output for this command is the same as that for the status link
command.
status processor-channel 1
The following screen appli es to processor channels c arried over link type of
Ethernet or ppp (using the TCP/IP protocol).
PROCESSOR CHANNEL STATUS
Channel Number: 1
Channel Status: Administered but not connected
Link Number: 3
Link Type: ethernet
Message Buffer Number: 0
Reset Count: 0
Retransmission Count: 0