DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
555-230-126 Issue 4
June 1999
Maintenance Object Repair Procedures

9-139ASAI-PT

9
Figure 9-2. BRI Port Local LAN Looparound Path
Table 9-55. TEST #618 BRI Port Local LAN Looparound
Error
Code Test
Result Description/Recommendation
1015 ABORT The port is not in the out-of-service state.
1. Display the Port Status form using the status bri-port UUCSSpp
command to determine which stations or adjuncts are on this port.
2. Use the extension shown on this form in the status station command to
determine if the station or adjunct is in use.
3. If the port is in use , wait until it is idle, and use the busyout port
UUCSSpp command to place it in the out-of-service state and repeat
this test.
!WARNI NG:

Since the "busyout" command is destructive, using this command

prior to the port being idle causes all transactions associated with the

ASAI on the port to be torn down. Note that third party calls

established by an ASAI adjunct remain connected even though the

port is taken out-of-servic e.

Continued on next page
BRI LINE
CIRCUIT
PACK
PACKET
INTERFACE
PACKET BUS
.
.
.
.
. . . . . . . . . . . . . . . . . . . . . . .
.
.
.
.
.
.
. . . . . . . . . . . . . . . . . . . . . .
.
.
.
.
.
. . . .